KRISS Vector CRB 9mm Review

The KRISS vector CRB has very low recoil. But is this worth the price? The KRISS vector is an iconic firearm that may have reached that status faster than any other. Its striking appearance is what makes it stand out from other submachine guns and PCCs. Its unique design was not chosen to make it stand out visually. However, it is the result of the Vector’s unconventional internals. The KRISS Super V System (KSVS) was created to dramatically reduce recoil as well as muzzle climb. This system is what gives the Vector its high price. The real question is whether the KRISS Vector’s benefits outweigh the cost. The Vector was first announced in 2007 and made commercially available a few years later. Its space-age aesthetics quickly caught the attention of the public. The gun’s prominent use in movies and video games soon after its release was a testament to this. The gun was new when it was made famous by Total Recall and Call of Duty. The Vector’s primary selling point is its low recoil, which caught the attention of some law enforcement agencies and military groups. These organizations use the select-fire (and original), versions of the gun and not the semi-auto Vector CRB Commercial version. This review will focus on that variant. Although I cannot speak to the effectiveness of the recoil system when shooting in full-auto, it would almost certainly be better than when shooting in semi-auto. The huge block of material that lies between the Vector’s trigger guard and magazine well is not there to make it look sci-fi. It’s there to allow the bolt to cycle into. The field stripping process is simple and intuitive. Only four pins must be removed. The KSVS is located next to the Glock-pattern 17 round magazine. The Vector travels downward instead of rearward like most self-loading firearms. This reduces recoil and makes it more enjoyable to shoot. The muzzle is very stable and easy to aim for through multiple shots. It takes very little effort to quickly place a magazine in the A-zone, even when firing from a distance of 30 yards. The included flip-up iron sights made it easy to quickly place the entire magazine in the A-zone. It is very easy to hold the rifle on target with one hand because its center of balance lies so far to the rear. This is a great feature for tactical tactical uses of the gun. The Vector can be fired with one hand even if one arm is not available. It makes it easier to hold the gun in your work space during reloads. The CRB was very accurate and printed tight groups on paper at 50 and 100 yards. This testing was done using the included iron sights. However, this is where you start to see the drawbacks. The offset between the bore’s diameter and the sights is a problem when it comes to aiming. Anyone who shoots AR-15s regularly should be familiar this phenomenon. However, it is more apparent on the Vector. The large offset between the bore and the sights is less obvious than rifles with a greater distance between the sights to the bore. My testing of the rifle revealed that I only needed to adjust my point of aim a few inches lower to hit the target at 30 yards. No compensation was required when firing at a half-scale steel plate at 100 yards. It is also worth noting that the irons can be adjusted for windage and elevation. However, I left them as they were when I received them from the factory. The KRISS Vector’s adjustable irons can be adjusted for windage and elevation. However, I left them as they were at the factory. The only problem I had was due to the lack of a break in period. The bolt locked to the rear while I was halfway through the magazine. It was able to get through the rest of the testing after being dropped by the bolt. Remington UMC 115 grain and Federal American Eagle115 gr. were the primary ammo used. Federal provided some ammo for this review. The only other Vector quirks worth noting is loading the weapon. The charging handle is notoriously stiff, and my example was no exception. Also, loaded magazines don’t like locking in on closed bolts. These should not be problems in the field. However, the charging handle can be used only during the initial loading, just like an AR-15. All subsequent magazines can be easily inserted with the bolt locked back, and the bolt just as easily dropped using the generous release button.VerdictFinally we arrive at the question of whether or not the KRISS Vector CRB is worth its asking price of $1,575.That’s hard to answer, as things are worth whatever someone is willing to pay for them, and there are certainly people who want a Vector badly enough to pay that. The rifle’s quality construction matches its futuristic look, and it does feel expensive when in your hands. The answer is probably no. I felt that the KRISS Vector’s low recoil was due to its heavy weight. The CRB variant has a 16-inch barrel that is covered in a faux suppressor. The entire package weighs 8 pounds. Although the KSVS is a great option, an 8-pound 9mm rifle with an inside stock should still be very enjoyable to shoot. They can also be cheaper. 9mm AR-style rifles weigh an average of 6 to 7 pounds. These rifles will have more recoil than KRISS because they are lighter and don’t have fancy KSVS recoil systems. The modularity of the AR platform means that it is possible to build one that has similar recoil to the Vector BRS for a fraction of the cost. You can also add weight to the package by installing a muzzle brake. Unfortunately, I was not able to test the Vector side-by-side as I didn’t have access. Although I cannot say if the hypothetical 9mm AR would shoot as well as the KRISS, I am confident it could at a fraction the price. The Vector CRB is a great rifle and I enjoyed shooting it. If you are captivated by the gun’s appearance or mechanical characteristics and have the funds to purchase one, then go ahead. Target grids and bullseye sizes can be downloaded in MOA. This is a great option for long-range shooting. Enter your email address below.