Weight is a major factor when it comes to suppressed shooting. You don’t want the muzzle to be too heavy. Primary Weapons Systems uses 3D-printed aerospace grade titanium to construct its BDE suppressor line. The company offers four different calibers that won’t slow down your firearm.
Primary Weapons Systems BDE Suppressors
The BDE line is made of 3D-printed titanium aerospace grade, and the weight varies from 4.2 to 17.4 ounces depending on the model. According to the company’s claims, 3D-printed Titanium is lighter and stronger compared to traditional machined titanium. You can expect your cans to perform well for a long time and be lightweight.
The BDE 762 is available in four different calibers: BDE 9mm and BDE 22. You can choose from four different suppressors, ranging from.22 to.300WM.
The BDE 762
Photo by Primary Weapons Systems
The BDE 762 is compatible with.300 WM, and has a 1.75-inch diameter. The company recommends a minimum barrel of 10.5 inches when shooting.223/5.56 and select fire. The universal 1.375×24 pattern is compatible with most suppressor mountings.
A PVD coating provides a durable and long-lasting finish. The modular design also features removable baffles that can be used to change the length (between 6.5-8.2 inch) and noise reduction rating. The taper-threaded design of the baffles also prevents carbon from locking between baffles. The symmetrical notches on the internal baffles increase accuracy while the exterior textures reduce heat mirage.
MSRP: $1,099.95
The BDE 556
Photo by Primary Weapons Systems
The BDE 556 can be used with calibers as high as 5.56. It also has a diameter of 175mm. The 556 is also modular, allowing for a range of lengths (between 5.4 and 6.5 inches) as well as noise reduction ratings. The universal 1.375×24 pattern is compatible with most suppressor mountings.
A PVD coating is applied to the outside of the cylinder for a durable finish and a longer life. Like the 762, 556 also features taper-threaded Baffles that prevent carbon from locking between baffles. The symmetrical notches on the internal baffles also help with accuracy, while the exterior textures help by dissipating heat mirage.
MSRP: $974.95
The BDE 9mm
Photo by Primary Weapons Systems
The BDE 9mm has a diameter of 1.45 inches and is compatible with all calibers from.300 BLK Subsonic up to.300 BLK Subsonic. Modular design allows for adjustment from 5.1-6.26 inch and noise reduction ratings. Similarly, taper-threaded Baffles prevent carbon from locking between baffles and causing them to loosen.
The PVD coating combined with Type 2 anodizing extends the life of the can. The universal 1.125-28 tpi pattern is compatible with most suppressor mountings. The symmetrical internal baffle notch increases accuracy and the exterior textures reduce heat mirage.
MSRP: $699.95
The BDE 22
Photo by Primary Weapons Systems
According to the company, the BDE 22, with a diameter of 1 inch, weighs only 4.2 ounces. It is the lightest suppressor for 5.7×28.22 on the market. The BDE 22 measures 5.6 inches in length and features a removable monocore that is 3D-printed. DLC coatings on the inside and out offer increased durability and a clean finish.
The BDE 22 is compatible with standard 1/2×28 threads, making installation easy. The baffles are also taper-threaded to prevent carbon from locking between baffles.
MSRP: $449.95
Availability
Primary Weapons Systems BDE Suppressors are now available with MSRPs ranging from $449.95 to $1,099.95 depending on the model. Visit PrimaryWeapons.com for more information.
Continue Reading
You didn’t find the information you were looking for
Search Engine
The post Primary Weapons Systems Releases 3D-Printed BDE Suppressors first appeared on Personal Defense World.
